FRP fans are frequenly used for clean rooms.
* Waste water and Sewage Treatment Plants
  Hydrogen Sulfide builds up (H2S) in sewage plant facilities and causes an odor problem that has to be treated. Depending on the size of these stations corrosion resistant fans are needed. This gas can also be very volatile and will require explosion proof motor and static grounding of the fan housing by graphite impregnation that AB Blower can provide too.
* Salt Air and High Humidity Environments
  Any facility near the salt air is also a good place for plastic fans and the humidity will eat through metal fans.
* Steel and Wire Manufacturing
  As the steel comes in and sits at these plants impurities and scale develop on the steel or the wire that needs to be cleaned off before the wire or steel can be properly worked with. Acid baths are needed for this and the corrosive fumes coming off these aced baths are highly corrosive...
* Stainless Steel and other Metal Production Facilities
  In tha annealing and Pickling process acid baths are used to strip scale off the steel after the annealing process that smoothed out grain patterns that may have formed during the annealing process. Later on acids are used again to support oxidation.
* Chemical and Petrochemical Industries
* Jet Engine and Power Plant Turbine Manufacturing or Servicing
  Molted Salt tanks are often used here to descale metals coming out of hot furnaces. Pickling and cleaning of titanium which is used in Jet engine parts also utilize acid baths as does nickel plating.
* Electroplating and Metal Finishing
  These industries use fiberglass fans and fume scrubbers.
* Scrubber OEMs and Designers